●Remove the key from the ignition and disconnect the negative (-) battery terminal prior to installation of this product.
Failure to do so could result in a fire caused by an electrical short circuit.●Take care not to install this product in a way that interferes with safety equipment such as seat belts and air bag
systems or vehicle operation equipment such as engine controls, steering wheel or brake systems. Interference
with normal operation of the vehicle can result in an accident or fire.●Solder or use a solderless connector for wiring connections and make sure connections are insulated. In areas
where there could be tension or sudden impacts on the wiring, safeguard the wiring with corrugated tubing or other
shock absorbent material. Accidental shorts can cause fires.●The ignition-switched +12V(IGN) line must be connected to the vehicle's ignition-switched wire with a fuse of 30A or
less. High-capacity fuse(more than 30A) will not blowout even with an abnormal current flow and may cause fire.
●Use a fuse of regulated capacity when the fuse of the power wire is changed. Using a fuse that exceeds regulated
capacity may cause fire. ●Carefully consider the installation location and driver's operation of the product beforeinstallation. Do not install the product where it interrupts driving and the safety deices of vehicle.
Be sure not to install the unit where it could fall. Improper installation or operation could cause the product to fall and damage the vehicle or cause serious danger by impeding driving. ●Do not disassemble or modify this product. Such actions can not only damage or destroy the product but will also void the warranty. ●Do not perform installation of this product immediately after the engine has been switched off. The engine and exhaust system are extremely hot at this time and can cause burns if touched.●Ensure that the wiring of this product does not have an adverse impact on the other wiring of the vehicle. Any
controlling devices or other electronic components of the vehicle could be damaged.●Please keep children and infants away from the installation area. Children may swallow small parts or be injured in
other ways. ●This product is designed for use on 12V vehicles. Do not install this product on vehicles with 24V ●Insulate any unused wires. If any wires or connectors loosen during installation, please make sure they are correctly reattached. ●Dropping any of the components of this product will result in damage to the product. ●Excessive force on switches/terminals may result in damage to the product.●Use only the wires provided. If additional wires are required, use the same of quality and gauge wire as is provided
with the kit.●Do not attach wires on the body of the vehicle or engine parts as this may result in damage to the product.
●Install wires away from ignition and also radio signal frequency interference as this could cause the gauges to
malfunction.●Do not place wires near the engine, exhaust pipe or turbine. It may result in damage or fusion of wires.
●Wear gloves to avoid burns when soldering and cuts when working with wiring. ●Make sure the waterproof processing is done when diverging wires in the engine compartment. ●Do not pull the wires out of connectors forcefully. The connectors may be broken and the wires may be cut. When pulling out the wires, press the lock firmly and unclip the locks of connectors. ●Do not install gauges in dashboard on passenger's side in case an air bag is not equipped on the passenger's side. It doesn't meet vehicle safety Confirmation●Be sure to follow all instructions in this manual to ensure safe installation and operation of the product.
●When the negative (-) battery terminal is disconnected, equipment such as clocks and audio components having
internal memory may lose their memory data. Follow the operation manual of each component to reset data after
installation of this product.●After installation is complete, return this operation manual and the package to the customer along with the warranty.
●If car navigation system or car television is installed in vehicle, gauges and wires of this product need to be kept as
far away as possible from the wiring and installing positions of car navigation system or car television. Failure to do
so may result in interference of television display(VHF). About Installation and Operation(for customer and installation personnel)●Please have this product installed by the retail store or dealer where it was purchased. Installation by the customer
will void the warranty.●Do not disassemble or modify this product. Such actions can not only damage or destroy the product but will also
void the warranty.●In order to ensure safe driving, check the information on the gauge only for short periods of time. Looking at the
display for long periods of time could distract adequate attention from the road and result in an accident.
●Discontinue use of this product if nothing is displayed, water gets into the unit, or smoke or a strange odor comes
from the unit. If such a condition occurs, contact the sales outlet or installation personnel as soon as possible.
Continued use while the condition exists could result in an accident or fire. ●Do not operate during driving.●On no event will Nippon Seiki Co., Ltd. be liable to you for any damages arising out of the use or inability to use the
product, even if Nippon Seiki Co., Ltd. has been advised of the possibility of such damage.●Do not pull the wires out of connectors forcefully. The connectors may be broken and the wires may be cut. When
pulling out the wires, press the lock firmly and unclip the locks of connectors. Confirmation ●This product cannot be linked to the Defi-Link System.●The RPM of this product are for reference purposes only. Please drive according to the indication of vehicle's
originally equipped instruments.●This product can be used only on 1, 2, 3, 4, 5, 6, and 8 cylinder vehicles with 4 cycle engine. Refer to the Product